Building a PC
My PC BUILD Components that I used Gigabyte B250M-DS3H Motherboard ZM450-FX 450W power supply Intel Pentium G4600 Processor Toshiba 1TB HDD WD Blue 250GB SSD 16GB DDR4 AFOX GTX 1050TI Graphics Card Computer Case I first opened the Motherboard and installed the CPU and cooler Then I installed RAM by firmly pressing the ram to the ddr4 slot. I screwed the motherboard in to the computer case and made sure the the screws were tightly screwed. I installed power supply. This power supply was bit smaller than the normal supply but I used an adapter to make it fit the the case. I installed SSD and HDD. I couldn't screw the SSDtightly, because the screw was to long for SSD. I had add a tape to make it stay on. I installed the graphics card and booted my computer for the first time. I first had some problems booting the computer, but it turns out that it was because of my graphics card. Once I removed the graphics card a booted, it booted up with...